The Number question lets you collect numeric values in your forms, such as quantities, measurements, hours, or instrument readings.
You can use it to record temperatures, pressures, weights, hours worked, hour meter readings, or units produced, among other data. You can also set up validations to control the values users can enter.
⚙️ How do I add a Number question?
Open the Form Builder and select the form you want to edit.
Click Add new question and select the Number type.
Fill in the following fields:
Title: the name of the question. It's shown when answering and in reports and exports.
Description: instructions or additional information to guide the person answering. It's optional and appears below the title, in the app and in the web form.
Set up the validation, if you need it. Each option is explained below.
Open Advanced Options and set up what you need:
Required: the user must answer the question to continue.
Skip questions: sets which question the form goes to based on the answer.
Click Save.
✅ What validations can I set up?
You can set conditions to control the values users enter. If the value doesn't meet the condition, the answer can't be submitted. There are three validation types:
1. No validation
Allows any numeric value, with no limits.
2. Fixed range
Lets you define the allowed values with limits you set manually:
Greater than: the value must be higher than the number set. For example, greater than 10.
Greater than or equal to: the value must be equal to or higher than the number set.
Less than: the value must be lower than the number set.
Less than or equal to: the value must be equal to or lower than the number set.
Between: the value must be within the range set. For example, between 10 and 50.
Not between: the value can't be within the range set.
Example: to record temperatures between 0 and 100 °C, use the Between condition with those two values as limits.
3. Relative range
Compares the value entered with another reference value. It has two modes:
Compare with another question in the form
Compares the value with another Number question in the same form. It's useful for validating progressive measurements, such as start and end hour meter readings, consumption, or measurements between shifts.
To set it up, you define:
Comparison type: the condition the value entered must meet.
Minimum value: a previous Number question used as the reference.
Offset: the margin used in the comparison.
Example: if you have a "Previous reading" question and want the new reading to be no lower than that value and no more than 5 units above it, with a previous reading of 100, values between 100 and 105 are accepted.
You can also use it inside groups of repeatable fields.
💡 This mode only works when answering from the mobile app and is enabled per account. If you don't see it, contact us through the support chat.
Within the margin of the last reading
If the number question updates an asset's meter, you can validate that the new reading is within a margin of that meter's last recorded reading.
Under Validation type, select Relative range.
Under Comparison type, choose Within the margin of the last reading.
Set how much the reading can go down and how much it can go up.
Example: if the last reading was 1,000 h and the margin is 5 back and 50 forward, values between 995 h and 1,050 h are accepted, including both. If the value is outside that range, the answer can't be submitted and the message shows the exact range.
If you leave the forward margin empty, there's no upper limit. A 0 sets the limit exactly at the last reading.
If the asset doesn't have any readings yet, the answer is recorded without validation.
If the question isn't linked to a meter, the option appears disabled.
It's not available inside groups of repeatable fields.
It works on the web platform and in the app, even offline.
📱 How is it shown when answering?
The question appears as a field for entering a numeric value. The way you move through the form may vary depending on the form experience enabled in the account.



